This Wedge-Bolt+ Zinc Plated Anchor from Powers Fasteners is a one piece, heavy duty screw anchor with a finished hex head and a blue tip. It isnsimple to install, easy to identify and fully removable. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement.
Features and Benefits:
- Anchor can be installed through standard fixture holes
- Wedge-bit size is matched to the nominal anchor diameter
- Diameter, length and identifying marking stamped on head of each anchor
- Consistent performance in high and low strength concrete
- Fast installation with a powered impact wrench
- One-piece, finished head design eliminates improper assembly or missing components
- Fully removeable
General Applications and Uses:
- Racking, shelving and material handling
- Support ledgers and temporary attachments
- Interior applications/low level corrosion environment
- Retrofits, repairs and maintenance
- Fencing and railing
- Seismic and wind loading
Suitable Base Materials:
- Normal-weight concrete
- Sand-lightweight concrete
- Concrete over steel deck
- Grouted concrete masonry (CMU)
- Solid clay brick
Approvals And Listings:
- International Code Council, Evaluation Service (ICC-ES), ESR-2526 for concrete. Code compliant with the 2015 IBC, 2015 IRC, 2012 IBC, 2012 IRC, 2009 IBC, 2009 IRC, 2006 IBC, 2006 IRC.
- International Code Council, Evaluation Service (ICC-ES), ESR-1678 for concrete masonry code compliant with the 2012 IBC, 2012 IRC, 2009 IBC, 2009 IRC, 2006 IBC, 2006 IRC.
- Tested in accordance with ACI 355.2 and ICC-ES AC193 for use in structural applications in concrete under the design provisions of ACI 318 (Strength Design method using Appendix D)
- Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors)
- Evaluated and qualified by an accredited independent testing labortatory for reliability against brittle failure, e.g. hydrogen embrittlement
- Tested in accordance with ASTM E488 and AC106 criteria
